PRODUCT CONFIGURATOR

Configure your VALDUR.

Technical specifications, optic families, and control systems for the VALDUR street luminaire. E-numbers and article numbers are provided for registered projects — contact POLAB.

Six power levels — one shared platform.

Model	Power	Luminous flux (STRADA)	Efficacy	Current	Available optics	Typical application
VALDUR 10	12.0 W	1 832 lm	153 lm/W	220 mA	STRADAAMBERSPECTRE	Footpaths, residential streets
VALDUR 20	15.5 W	2 443 lm	158 lm/W	294 mA	STRADAAMBERSPECTRE	Local roads, cycle paths
VALDUR 30	22.5 W	3 946 lm	175 lm/W	295 mA	STRADAAMBERSPECTRE	Urban streets, through roads
VALDUR 40	33.3 W	5 669 lm	170 lm/W	447 mA	STRADAAMBERSPECTRE	Through roads, industrial areas
VALDUR 60	45.6 W	7 472 lm	164 lm/W	398 mA	STRADAAMBERSPECTRE	Dual carriageways, large open areas
VALDUR 100	63.8 W	10 147 lm	159 lm/W	574 mA	STRADAAMBERSPECTRE	Industrial environments, high-mast mounting

Luminous flux values are measured with LEDiL STRADA-2X2 (clear lens) and Philips Fortimo FastFlex 2×2 UHE LED module at 4000 K. With AMBER optics, luminous flux decreases by approx. 25–27 %. With SPECTRE optics, comparable luminous flux is achieved with a warmer colour appearance.

Three optic families — one shared holder platform.

All three optic families use the LEDiL 50×50 mm (2×2) platform and are drop-in compatible. Optic selection is made project-specifically based on requirements for efficacy, blue-light reduction, and beam character.

STRADA-2X2

Standard white optic

Clear PMMA lens with high optical transmission (≥90 %). Delivers full white light with reference lumen values.

Efficacy vs LED ≥90 %

Blue-light reduction None

CCT 3000 K / 4000 K

Beam type variants

T2 · T4 · DWC · ME · SCL

Best for

Urban lighting, through roads, industrial areas, harbours — where maximum luminous flux is the priority.

AMBER-2X2

Insect-friendly yellow-filter lens

Yellow-tinted PMMA lens that blocks 99 % of blue light (380–500 nm). Recommended in nature reserves, coastal environments, and residential areas.

Efficacy vs LED approx. 73–74 %

Blue-light reduction ≥99 %

Effective CCT approx. 1900–2500 K

Beam type variants

T2 · T4 · DWC · ME

Best for

Nature reserves, coastal natural environments, residential street networks, and areas with requirements for minimal light pollution.

SPECTRE-Y-2X2

Spectral redistribution lens

Converts blue light to longer wavelengths rather than absorbing it. Achieves blue-light reduction while maintaining luminous flux — comparable to STRADA.

Efficacy vs LED ~95–100 % (manufacturer data)

Blue-light reduction High (conversion)

Effective CCT approx. 2200–2700 K

Beam type variants

T2 · T4 · ME · SCL

Best for

Dual carriageways, squares, and car parks where high illuminance levels are required but blue-light impact must be minimised.

BEAM TYPES

All three optic families are available in multiple beam distributions. Selection is based on road width, pole spacing, and uniformity requirements.

Beam type	CIE class	Character	Typical application	Available in
T2	Type II	Narrow, long throw	Footpaths, narrow streets	SASp
T4	Type IV	Extremely wide spread	Wide roads, squares, car parks	SASp
DWC	Type III	Universal distribution	General urban lighting	SA
ME	Class M	High uniformity + back light	Wide street networks, ME-class roads	SASp
SCL	Type II/III long	Extra long throw	Footpaths and local roads, long pole spacings (S/P class)	SSp

S = STRADA-2X2 · A = AMBER-2X2 · Sp = SPECTRE-Y-2X2. Photometric files (LDT/IES) for lighting calculations in DIALux and Relux are available on request. Additional variants are currently under measurement and validation.

The right light tone for the location

3000 K and 4000 K are standard. Other colour temperatures are ordered as required. For ecologically sensitive environments there is an Amber optic that blocks up to 99% of blue light.

1900 K Amber

Bio/Amber optic. Nature reserves, coast and dark-sky areas.

3000 K Standard

Warm white. Cities, parks and residential areas.

4000 K Standard

Neutral white. Through roads with clear visibility.

2200 / 2700 / 5000 / 5700 K

To order. Warm white to cool white for industry and technical areas.

Four control options.

VALDUR is configured with drivers from Signify (formerly Philips). Control system is selected at time of order. DALI-2 and Zhaga Book 18 are recommended for project installations with long-term flexibility requirements.

Fixed output

Constant luminous flux. Simplest to install. Suitable where no control infrastructure exists.

0–10 V dimming

Analogue dimming signal. Compatible with most existing control systems.

DALI-2

Digital addressable control. Individual group and luminaire level. Recommended for smart city projects and municipal networks.

Zhaga Book 18

Standardised interface for tool-free driver replacement. Future-proofs the luminaire's control electronics over its entire service life.

Recommended for long-term investment

Technical specifications

The housing is compression-moulded in SMC thermoset composite under high pressure. The glass fibres are embedded in a polymer matrix that cross-links into a permanent, dimensionally stable structure — the material does not soften with heat and does not corrode. A patent-pending integrated heat-dissipation system keeps the operating temperature stable.

Fasteners are in 316 stainless steel (marine grade) and the cover is 4 mm tempered glass. More detail under Materials.

HousingSMC thermoset composite (glass-fibre reinforced)

Protection ratingIP66 / IK08

Protection classClass II

LED service life>100,000 h (L90/B10)

Power range12–65.8 W

Luminous flux1,805–10,147 lm

System efficacyup to 175.9 lm/W

Colour temperature3000 / 4000 K standard · 2200–5700 K to order · 1900 K Amber

Colour renderingCRI 70 (standard) / CRI 80 (ColorRevive)

Mains voltage220–240 V / 50–60 Hz

Inrush current120 A / 277 µs

Operating temperature−40 / +40 °C

Weight3.5–5.1 kg

InstallationØ 48 or 60 mm pole

Fasteners316 stainless steel (marine grade)

ColoursLight grey / Black (any colour to order)

Warranty20 yr housing + 5 yr function

E-numbers and article numbers

The standard range with article and E-numbers for ordering from a wholesaler. All variants are supplied with Philips Fortimo FastFlex UHE LEDs and Philips Xitanium LP drivers (standard), IP66 / IK08. Optics and controls are selected at ordering.

4000 K — Neutral white

Standard

Model	Power	Luminous flux	Light grey (GRY)	Black (BLK)
VALDUR 10	12.0 W	1,832 lm	VL010-40K-GRY E-7729470	VL010-40K-BLK E-7729482
VALDUR 20	15.5 W	2,443 lm	VL020-40K-GRY E-7729471	VL020-40K-BLK E-7729483
VALDUR 30	22.5 W	3,946 lm	VL030-40K-GRY E-7729472	VL030-40K-BLK E-7729484
VALDUR 40	33.3 W	5,669 lm	VL040-40K-GRY E-7729473	VL040-40K-BLK E-7729485
VALDUR 60	45.6 W	7,472 lm	VL060-40K-GRY E-7729474	VL060-40K-BLK E-7729486
VALDUR 100	63.8 W	10,147 lm	VL100-40K-GRY E-7729475	VL100-40K-BLK E-7729487

3000 K — Warm white

Standard

Model	Power	Luminous flux	Light grey (GRY)	Black (BLK)
VALDUR 10	12.0 W	1,805 lm	VL010-30K-GRY E-7729476	VL010-30K-BLK E-7729488
VALDUR 20	15.8 W	2,443 lm	VL020-30K-GRY E-7729477	VL020-30K-BLK E-7729489
VALDUR 30	22.9 W	3,946 lm	VL030-30K-GRY E-7729478	VL030-30K-BLK E-7729490
VALDUR 40	33.6 W	5,669 lm	VL040-30K-GRY E-7729479	VL040-30K-BLK E-7729491
VALDUR 60	44.6 W	7,472 lm	VL060-30K-GRY E-7729480	VL060-30K-BLK E-7729492
VALDUR 100	65.8 W	10,147 lm	VL100-30K-GRY E-7729481	VL100-30K-BLK E-7729493

1900 K — Bio Amber

Blocks up to 99% blue light

Model	Power	Luminous flux	Light grey (GRY)	Black (BLK)
VALDUR 10	16.8 W	1,805 lm	VL010-19K-GRY E-7729494	VL010-19K-BLK E-7729501
VALDUR 20	22.1 W	2,443 lm	VL020-19K-GRY E-7729495	VL020-19K-BLK E-7729502
VALDUR 30	31.5 W	3,946 lm	VL030-19K-GRY E-7729496	VL030-19K-BLK E-7729503
VALDUR 40	44.9 W	5,669 lm	VL040-19K-GRY E-7729497	VL040-19K-BLK E-7729504
VALDUR 60	66.1 W	7,472 lm	VL060-19K-GRY E-7729498	VL060-19K-BLK E-7729505

VALDUR 100 is not available in 1900 K Amber.

E-numbers and article numbers are provided for projects.

VALDUR is supplied as project orders. POLAB accepts enquiries from municipalities, lighting consultants, electrical contractors, and property managers.

E-numbers and article numbers

Provided for registered projects. Contact POLAB with a project description.

Lead times

Standard configurations are typically delivered within 3–14 working days from confirmed order. Project-specific configurations may require longer lead times.

Download photometric files

LDT and IES files for DIALux/Relux are available on request. Additional variants are currently under measurement and validation.

Project-specific configuration

POLAB advises on optic selection, power level, and control system for your specific environment and requirements.

Enquiry

info@polab.se

Main line

+46 (0)33-400 44 00

Please include project name, number of luminaires, environment type (coastal, industrial, urban) and any requirements for optics or control system — and we will respond with relevant information.

Technical data Contact us