VALDUR 10 – 100

Technical Data.

POLABUpdated 2 October 2026

Specification-ready data for VALDUR 10 through 100. Complete performance figures, environmental ratings, and interface documentation.

Product sheet

CORE TECHNOLOGY

Five technology areas that define VALDUR.

VALDUR is built around five technology areas that together determine performance, service life, and operational reliability. Select a topic to explore further.

VALDUR SMC thermoset composite street luminaire

Materials

SMC composite is a non-metallic material that does not undergo metallic or electrochemical corrosion. The SMC housing itself therefore cannot experience galvanic corrosion or pitting in the same way as a metal housing and needs no protective coating system against such corrosion. The patent-pending thermal-management system uses internal aluminium heat sinks and contributes to lower operating temperatures for the electronics and driver within the luminaire’s specified operating range.

Optics

Three optic families: STRADA for road lighting, AMBER for pedestrian areas and wildlife zones, and SPECTRE for ecologically sensitive applications. Each available in multiple beam distributions.

LED Modules

Bin-sorted LED chips. LM-80 covers measured data for LED packages, arrays and modules; TM-21 is a projection method, not a test. The supporting evidence must be verified for the selected LED module and configuration. Available in 2200–5700 K with Amber and SPECTRE-Y variants.

Philips Xitanium LED driver for street luminaires

Drivers

Constant-current drivers with integrated surge protection. 1–10 V for LP S1 or DALI-2 for FP/SR/CR; the specified SR/CR configurations are also D4i-certified. PF 0.98–0.99 at rated conditions; THD depends on driver and operating point.

LumenRadio AirGlow wireless control node

Controls

LP S1 with 1–10 V is standard. DALI-2 is available with a selected FP, SR or CR driver; the specified SR/CR drivers are D4i-certified. A Zhaga Book 18 socket is optional.

FULL SPECIFICATION

VALDUR 10 – 100 — Complete specification.

The VALDUR series covers everything from footpaths and cycle routes to wider road environments. The table shows typical values at 4000 K — luminous flux and efficacy are affected by optic, colour temperature, and drive current.

BEST EFFICACY

164.3 lm/W

VALDUR 60 at 4000 K. Subject to configuration.

VALDUR 10 – 100 — Complete specification.
Model	Power	Luminous flux	Efficacy
VALDUR 10	12.1 W	1,835 lm	151.7 lm/W
VALDUR 20	15.4 W	2,445 lm	158.8 lm/W
VALDUR 30	24.1 W	3,945 lm	163.7 lm/W
VALDUR 40	34.8 W	5,665 lm	162.8 lm/W
VALDUR 60	45.5 W	7,475 lm	164.3 lm/W
VALDUR 100	62.7 W	10,148 lm	161.9 lm/W

White-light values at 2200–4000 K are provisional calculated luminaire values based on component data, not measured photometry of the complete luminaire. The final configuration and article/E-number correspondence are verified before ordering. Amber is reported separately.

Typical values at 4000 K. Luminous flux, efficacy, and power vary by optic, colour temperature, and drive current. Model number indicates flux level within the series — not wattage.

FULL SPECIFICATION

Technical reference data

Technical reference data
Parameter	Value
Light source	LED
Projected LED-module lumen maintenance	L90/B10 at >100,000 h
Power consumption	12.1–77.9 W for calculated white configurations at 2200–4000 K; 12.1–63.7 W at 3000/4000 K. Amber is specified separately.*
Efficacy	150.2–164.3 lm/W for white standard configurations at 3000/4000 K
Colour temperature (CCT)	2200 / 2700 / 3000 / 4000 / 5000 / 5700 K · Amber output approximately 1900–2900 K (indicative LEDiL example for 2200–5700 K LEDs; VALDUR is verified per configuration)
Colour rendering (CRI)	Standard white LED: Ra ≥ 70. ColorRevive: Ra ≥ 80. Filtered Amber and SPECTRE-Y are reported separately and are not covered by these general Ra values.
IP rating	IP66
IK rating	IK08 (5 joule)
Housing material	SMC composite (Sheet Moulding Compound)
Metal in housing	The SMC housing itself is non-metallic; the luminaire contains internal aluminium heat sinks and metallic fasteners.
Weight	3.5 – 5.1 kg (housing excl. components: 1.8 kg)
Operating temperature	−40°C to +40°C
Supply voltage	220 – 240 V AC, 50/60 Hz
Power factor	0.98–0.99 at rated conditions, depending on the selected driver
THD (Total Harmonic Distortion)	Driver- and operating-point-dependent; verify against the selected datasheet
Controls	1–10 V (LP S1) or DALI-2 (FP/SR/CR); the specified SR/CR configurations are also D4i-certified. Fixed output depends on configuration.
Mounting	Ø48 or 60 mm (adapter for centring on pipe/post)
Lens	Toughened glass 4 mm (frosted glass as option)
Colour	Light grey / Black (custom colour on request)
Cable	VALDUR 10–20: 6 m · 30–60: 8 m · 100: 10 m
Protection class	Class II
Surge protection	Selected Signify Xitanium driver: up to 6 kV differential mode / 10 kV common mode according to the driver datasheet · separate SPD as an option
Wind-exposed area	0.033 m²
Warranty	20-year corrosion warranty / 5-year functional warranty — see warranty terms

* VALDUR 100: 62.7 W at 4000 K or 63.7 W at 3000 K at same luminous flux. Typical values at 4000 K. Luminous flux, efficacy, and power vary by optic, colour temperature, and drive current. Model number indicates flux level within the series — not wattage.

PRODUCT IMAGES

VALDUR in detail.

VALDUR Street Light

Standard version

VALDUR luminaire with Zhaga Book 18 socket

VALDUR Zhaga

With Zhaga Book 18 node

VALDUR Zhaga 2

Alternative mounting

Sources and further reading

VALDUR product sheet — POLAB product specifications for the VALDUR range.
IES LM-80-21 — LED light-output maintenance measurement.
IES TM-21-21 — projection from LM-80 data.
LEDiL — Amber lens spectral examples.

NEXT STEP

Request the full data sheet.

POLAB prepares specification support using the correct LEDiL optic together with the selected LED module. Product data, dimensions, installation drawings and available photometric material are assembled for the selected configuration.

Product sheet Contact us

The product sheet is available as a PDF (in English) — open directly